Back to Top

elektrotechniek en elektronica

Tel: +31 40 2645345


19290 MEME-RETE

19290 MEME-RETE

€2.004,04
(Excl. btw)
: 19290

Digital Surface Resistance Meter Kit

 

Consisting of:

1    Digital Surface Resistance Meter
2    Test Leads, 1.5 m Length
2    2.27 kg Electrodes
1    Electrode Spacer, 25 cm
1    Electrode Spacer, 91 cm
4    AA Alkaline Batteries
1    Ground Plug Adapter
1    Gator Clip
25  Measurement Location Labels
1    Plastic Carrying Case
1    Certificate of Calibration

  • NEW large OLED display
    Displays resistance mantissa and exponent, temperature, relative humidity and test voltage
  • NEW internal memory
    Stores and recalls up to 100 measurements. Captures resistance, temperature, humidity and test voltage
  • NEW measurement stability modes
    Sets the 15-second electrification period for test requirements*
  • NEW electrode spacers
    Spaces the 2.27 kg electrodes to 25 cm and 91 cm for resistance point-to-point (Rtt) measurement requirements of IEC 61340-2-3 and IEC 61340-4-1
  • NEW measurement location labels (pack of 25)
    Labels and tracks areas and materials measured for surface resistance
  • Digital compliance verification surface resistance meter kit
    Measures resistance point-to-point (Rtt) and resistance-to-ground (Rtg) of worksurfaces, flooring systems, garments, packaging, and other materials in accordance with IEC 61340-2-3 and IEC 61340-5-1
  • Resistance range: <1.0 x 103 to >1.0 x 1012 Ohms
    Determines if a surface is conductive, dissipative or insulative for ESD control applications in electronics manufacturing or handling environments
  • Under load test voltages (10 V or 100 V ±5 %)
    Meets ANSI/ESD S20.20 resistance testing requirements for product qualification and compliance verification
  • 222002 concentric ring probe accessory
    Measures surface resistance per IEC 61340-2-3, the test method listed in Packaging Table 3 in EN 61340-5-1
  • NEW 19295 handheld electrode accessory
    Meets resistance measurement requirements of IEC 61340-2-3, IEC 61340-4-1, ANSI/ESD STM2.1 and IEC 61340-4-5
  • NIST calibrated with certificate included
    Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco products, see Calibration
  • Made in the United States of America